Hy no this it good
https://packages.ubuntu.com/bionic/libfftw3-mpi3
he managed to install it with this onto all versions ubuntu 16.04
Posts by portal vtmkhu
-
-
Please help..
sudo apt install php7.2-imagick
php7.2-imagick : Depends on this: libmagickcore-6.q16-3 (>= 8:6.9.6.8) but it cannot be installed
Depends on this: libmagickwand-6.q16-3 (>= 8:6.9.6.8) but it cannot be installed
E: The problems cannot be repaired, an injured held packets back.
-
I say thank you for the help and the much patience nicely.
-
Hy please help.
These I should install the accessory but this it one I cannot put it up alone onto 7.4
Can installation..:
Display MoreCode- sudo apt-get install php7.3-gd
- Reading package lists... Done
- Building dependency tree
- Reading state information... Done
- Some packages could not be installed. This may mean that you have
- requested an impossible situation or if you are using the unstable
- distribution that some required packages have not yet been created
- or been moved out of Incoming.
- The following information may help to resolve the situation:
- The following packages have unmet dependencies:
- php7.3-gd : Depends: libjpeg62-turbo (>= 1.3.1) but it is not installable
- E: Unable to correct problems, you have held broken packages.
VPS. Ubuntu 16.04 install php version: 5.3 5.4 5.5 5.6 7.0 7.1 7.2 7.3 7.4
i-MSCP 1.5.3
Build: 2018120800
-
sudo update-alternatives --config php
There are 6 choices for the alternative php (providing /usr/bin/php).
Selection Path Priority Status
------------------------------------------------------------
0 /usr/bin/php7.4 74 auto mode
1 /usr/bin/php5.6 56 manual mode
* 2 /usr/bin/php7.0 70 manual mode
3 /usr/bin/php7.1 71 manual mode
4 /usr/bin/php7.2 72 manual mode
5 /usr/bin/php7.3 73 manual mode
6 /usr/bin/php7.4 74 manual mode
Display MoreCode- perl /var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler/php_compiler.pl --register --packaged --packaged-only 7.1 7.2 7.3 7.4
- [INFO] Registering PHP versions in the PhpSwitcher plugin...
- [INFO] Registering the packaged PHP 7.1 version with data:
- - PEAR directory path : /usr/share/php
- - FastCGI binary path : /usr/bin/php-cgi7.1
- - FPM binary path : /usr/sbin/php-fpm7.1
- - FPM configuration file path : /etc/php/7.1/fpm/php-fpm.conf
- - FPM pool directory path : /etc/php/7.1/fpm/pool.d
- [INFO] Registering the packaged PHP 7.2 version with data:
- - PEAR directory path : /usr/share/php
- - FastCGI binary path : /usr/bin/php-cgi7.2
- - FPM binary path : /usr/sbin/php-fpm7.2
- - FPM configuration file path : /etc/php/7.2/fpm/php-fpm.conf
- - FPM pool directory path : /etc/php/7.2/fpm/pool.d
- [INFO] Registering the packaged PHP 7.3 version with data:
- - PEAR directory path : /usr/share/php
- - FastCGI binary path : /usr/bin/php-cgi7.3
- - FPM binary path : /usr/sbin/php-fpm7.3
- - FPM configuration file path : /etc/php/7.3/fpm/php-fpm.conf
- - FPM pool directory path : /etc/php/7.3/fpm/pool.d
- [INFO] Registering the packaged PHP 7.4 version with data:
- - PEAR directory path : /usr/share/php
- - FastCGI binary path : /usr/bin/php-cgi7.4
- - FPM binary path : /usr/sbin/php-fpm7.4
- - FPM configuration file path : /etc/php/7.4/fpm/php-fpm.conf
- - FPM pool directory path : /etc/php/7.4/fpm/pool.d
- [DONE] PHP versions scheduled for registration in the PhpSwitcher plugin:
- - PHP 7.1 (Packaged)
- - PHP 7.2 (Packaged)
- - PHP 7.3 (Packaged)
- - PHP 7.4 (Packaged)
- [INFO] Processing of PHP versions in progress. Please be patient...
- [DONE] PHP versions were processed.
-
That trouble I do not realise it, that what or how it would be necessary to repair it.
I can in Hungarian I do not talk to one translating this in English I do it what I write.
-
perl /var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler/php_compiler.pl --register 7.1 7.2
Do you believe it so?Display MoreCode- /var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler# perl php_compiler.pl --zts --packaged --register 7.2
- -bash: /var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler#: No such file or directory
- root@vmi271578:~# cd /usr/local/src
- root@vmi271578:/usr/local/src# /var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler# perl php_compiler.pl --zts --packaged --register 7.2
- -bash: /var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler#: No such file or directory
- root@vmi271578:/usr/local/src# perl /var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler/php_compiler.pl --register --packaged --packaged-only 7.2
- [INFO] Registering PHP versions in the PhpSwitcher plugin...
- [INFO] The packaged PHP 7.2 version hasn't been found, or one of its requirements isn't meet (unmet dependencies), and the --packaged-only flag is set. Skipping...
- root@vmi271578:/usr/local/src# perl /var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler/php_compiler.pl --register --packaged --packaged-only 7.1
- [INFO] Registering PHP versions in the PhpSwitcher plugin...
- [INFO] The packaged PHP 7.1 version hasn't been found, or one of its requirements isn't meet (unmet dependencies), and the --packaged-only flag is set. Skipping...
- root@vmi271578:/usr/local/src# perl /var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler/php_compiler.pl --register --packaged --packaged-only 7.3
- [INFO] Registering PHP versions in the PhpSwitcher plugin...
- [INFO] The packaged PHP 7.3 version hasn't been found, or one of its requirements isn't meet (unmet dependencies), and the --packaged-only flag is set. Skipping...
- root@vmi271578:/usr/local/src# perl /var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler/php_compiler.pl --register --packaged --packaged-only 7.4
- [INFO] Registering PHP versions in the PhpSwitcher plugin...
- [INFO] The packaged PHP 7.4 version hasn't been found, or one of its requirements isn't meet (unmet dependencies), and the --packaged-only flag is set. Skipping...
- root@vmi271578:/usr/local/src# perl /var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler/php_compiler.pl --register --packaged --install-dir /opt/my/install/directory 7.1 7.3 7.4
- [INFO] Scanning PHP site for the PHP 7.1 sources...
- [INFO] Found PHP 7.1 sources at http://php.net/distributions/php-7.1.33.tar.gz
- [INFO] The PHP 7.1.33 sources are already present in the /usr/local/src/phpswitcher directory. Skipping download.
- [INFO] Extracting the PHP 7.1.33 archive into /usr/local/src/phpswitcher/php-7.1.33 ...
- [INFO] Setup PHP build environment...
- [ERROR] main: open3: exec of /usr/sbin/cowbuilder --create --distribution xenial --architecture amd64 --basepath /var/cache/pbuilder/psw-ubuntu-xenial.cow --configfile /var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler/pbuilder/Ubuntu/.pbuilderrc --hookdir /var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler/pbuilder/Ubuntu/hook.d failed at /var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler/../../../../engine/PerlLib/iMSCP/Execute.pm line 116.
-
-
Succeesss!!!!
This problem:
/var/local/imscp
rename
/var/local/xxximscp
and run autoinstall. 5 min and full succes install (autoupdate)
i-MSCP 1.5.3
Build: 2018120800
Codename: Ennio Morricone
Thanks for help.
Display MoreCode- /var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler# perl php_compiler.pl --auto-setup 7.1
- Unknown option: auto-setup
- Usage: perl php_compiler.pl [OPTION]... [5.3|5.6|7.0|7.1|7.2|7.3|7.4]...
- PHP Compiler
- This script compile and install the various PHP versions. It can also register
- the compiled and/or packaged PHP versions in the PhpSwitcher plugin.
- REGISTRATION
- When the --register option is passed-in, PHP versions found in the installation
- directory are automatically registered in the PhpSwitcher plugin.
- If you want favor packaged PHP versions rather than compiled PHP versions, you
- must also pass the --packaged option, in which case, packaged PHP versions will
- be preferred when there are available.
- You can also work with packaged PHP versions only, by passing the
- --packaged-only option.
- Packaged PHP versions are considered only if the CGI/FPM SAPIs and PEAR
- distribution are all installed on the system.
- ENVIRONMENT VARIABLES
- The script support environment variables to change the default behavior.
- PSW_DISTRIBUTION={devuan_jessie|jessie|stretch|buster|xenial|bionic|ascii}
- This variable make it possible to change the target distribution. When the
- target distribution is a foreign distribution, the build will always be done in
- a chroot environment, and no PHP runtime dependencies will be installed on the
- system.
- If the install MAKE(1) target is involved, the '-foreign' suffixe will be added
- to the installation directory.
- PSW_FCHROOT=1
- When this variable is set, operations will executed in a chroot environnment,
- regardless of the involved MAKE(1) targets.
- OPTIONS
- -a, --register Register PHP versions in the PhpSwitcher
- plugin. Ignored when the target distribution
- is a foreign distribution.
- -b, --build-dir {dir} Build directory.
- Default: /usr/local/src/phpswitcher
- -d, --download-only Download only mode.
- -e --download-dir Download directory.
- Default: /usr/local/src/phpswitcher
- -f, --force-last Force download and build of latest PHP
- versions.
- -i, --install-dir {dir} Installation directory.
- default /opt/phpswitcher/20210716
- -j, --parallel-jobs {nn} Number of parallel jobs for MAKE(1).
- Default: CPU cores + 1 : 5
- -k --keep-builddir Keep current build directory.
- -n --no-chroot Don't operate in a chroot environment.
- -m --no-static-paths Don't create symlinks for static paths.
- -o, --packaged-only Only considere the packaged PHP versions. Only
- relevant with the --packaged option.
- -p, --packaged Favor registration of packaged PHP versions
- rather than compiled PHP versions when there
- are available. Only relevant with the
- --register option.
- -r, --runtime-dependencies Install the runtime dependencies for the
- involved PHP versions.
- -s, --register--only Skip download, build, and install processes
- when the no PHP version is found. Only
- relevant with the --register option.
- -t, --make-target {target} MAKE(1) target to execute. Pass this option
- multiple time for multiple targets.
- -v, --verbose Enable verbose mode.
- -z, --zts Enable PHP ZTS support.
- -?,-h --help Show this help.
- root@vmi271578:/var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler# perl php_compiler.pl --register 7.1
- [INFO] Scanning PHP site for the PHP 7.1 sources...
- [INFO] Found PHP 7.1 sources at http://php.net/distributions/php-7.1.33.tar.gz
- [INFO] The PHP 7.1.33 sources are already present in the /usr/local/src/phpswitcher directory. Skipping download.
- [INFO] Extracting the PHP 7.1.33 archive into /usr/local/src/phpswitcher/php-7.1.33 ...
- [INFO] Setup PHP build environment...
- [ERROR] main: open3: exec of /usr/sbin/cowbuilder --create --distribution xenial --architecture amd64 --basepath /var/cache/pbuilder/psw-ubuntu-xenial.cow --configfile ./pbuilder/Ubuntu/.pbuilderrc --hookdir ./pbuilder/Ubuntu/hook.d failed at /var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler/../../../../engine/PerlLib/iMSCP/Execute.pm line 116.
-
Delet /var/local/imscp directory..