Posts by protz3000

    Mehr infos zum System und bitte in English ansonsten wird @Nuxwin oder ein anderes team Mietglied diesen thread löschen.

    System-Info:
    - Proxmox 4.x LXC Container (wie bereits geschrieben)
    - Debian 8 Jessie (steht unter meinem Profil (Linux Distro: Debian Jessie))
    - i-MSCP 1.2.9 (Probleme mit Upgrade(Configs werden überschrieben),
    aber das ist ein anderes Problem und da es nur um den Mountpoint geht, hielt ich es nicht für relevant)


    - Englisch kann ich nicht so gut, deswegen frag ich ja im "GERMAN Corner"


    ------------------------------------------------------------------------------------------------------------
    Aber ich versuche es mal in Englisch zu beschreiben: / But i try to describe it in English:
    ------------------------------------------------------------------------------------------------------------


    I have an i-MSCP Installation in an LXC Container under Proxmox 4.x


    but i have a problem with the mountpoints created from i-MSCP for every domain


    In my server i have installed:
    - hardware raid 1 with 2x 300GB SAS disks
    - hardware raid 1 with 2x 3TB SATA Enterprise Disks


    The LXC container runs on the SAS Disks, while i have mounted additional volumes for each of '/var/www' and '/var/mail', which based on the SATA Enterprise disks.


    At the Moment i have the Problem that the 'extra' mountpoints, which were created from i-MSCP under '/var/www' are not on the SATA Enterprise Disks, but on the SAS Disks (where everything except '/var/www' and '/var/mail' should run)


    You can see that in the Code Section in my last post (i have changed the domain names for the forum)


    My Question is now:
    How can i configure i-MSCP, that it mounts on the volume as foreseen.


    Because my English is not so good and I am not sure if it is understandable,
    here again as it is intended for the volumes:
    1. Virtual Volume on SAS Disks (sas-vm--101--disk--1) is mounted to root filesystem ( / )
    2. Virtual Volume on SATA Enterprise Disks (sata-vm--101--disk--1) is mounted to ( /var/www )
    3. Virtual Volume on SATA Enterprise Disks (sata-vm--101--disk--2) is mounted to ( /var/mail )
    But the additional mounts from i-MSCP are created on 'sas-vm--101--disk--1' and not as intended on 'sata-vm--101--disk--1' (witch is mounted to '/var/www' )


    I hope you can help me.
    Thank you in advance.

    Hallo liebe i-MSCP'ler,


    Ich habe eine i-MSCP Installation in einem LXC Container unter Proxmox 4.x


    Allerdings habe ich ein Problem mit den Einhängepunkten die von i-MSCP für jede Domain erzeugt werden.


    In meinem Server habe ich ein Hardware Raid 1 mit 300GB SAS Platten und ein Hardware Raid 1 mit 3TB SATA Enterprise Platten.


    Den LXC Container wollte ich auf den SAS Platten laufen lassen,
    während für '/var/www' sowie '/var/mail' jeweils ein eigenes Volume eingebunden ist,
    welches auf den Ent.SATA Platten liegt.


    Nun habe ich allerdings das Problem, dass i-MSCP die 'extra' Mountpoints für die einzelnen Domains immer auf der SAS Platte anlegt,
    obwohl diese auf den Ent.SATA abgelegt werden sollten.


    Das sieht dann folgendermaßen aus: (Domains habe ich fürs Forum umbenannt)

    Meine Frage ist nun, wie ich i-MSCP dazu bringen kann, dass diese Mounts auf dem vorgesehen Volume angelegt werden.



    Ich hoffe ihr könnt mir dabei helfen.
    Vielen Dank schon mal im voraus. :)