Looking to get a Raspberry Pi 4 to run imscp for 3·4 domains with very low traffic, html sites webs and email. These are personal sites. Will it work ok?
Would be good to know if anyone is doing this?
Cheers,
Rob
Anyone running i-MSCP debian on a Raspberry Pi 4 (4gb ram)
- robbo007
- Thread is marked as Resolved.
-
Should work if you keep the reqirements fit. Maybe it wont be the fastest, but it should work.
-
-
Because you installed Raspbian and not Debian
https://itsfoss.com/debian-raspberry-pi/
Use this one: https://people.debian.org/~gwo…i-3_buster_PREVIEW.img.xz
It's Debian Buster… So you need i-MSCP from git
-
-
Or if you prefer, you can install ARM version of debian from here: https://cdimage.debian.org/cdi…-9.11.0-arm64-netinst.iso in the classic way, with CD/USB Boot.
I don't know if it will work or if you need some modified Kernel… Never tried...
-
I would actually recommend sticking to Debian Stretch right now instead of Buster, since its "normally" supported.
-
-
In the end I’ve used Ubuntu. Someone had done all the hard work preparing the image
works very fast. Thanks for all your help.