Updated RoundcubePlugins 1.2.2 to RoundcubePlugins 1.2.3. -> "502 Bad Gateway - nginx"

**kalmarr** · Oct 3rd 2015

Hello!

I would like to ask for your helps.

Only I updated the RoundcubePlugins 1.2.2 to RoundcubePlugins 1.2.3.

The IMSCP freeze and I have got a error message "502 Bad Gateway - nginx" - about the site.

I tried restart imscp - 'service imscp_panel restart"

I have got a error message:

[FAIL] Restarting i-MSCP frontEnd PHP FCGI processes: imscp_panel failed!

Syslog - >
fqhn kernel: [10192484.477220] php5-cgi[32096]: segfault at f ip 00007fbe61bb6ac4 sp 00007ffe125af110 error 6 in libpthread-2.13.so[7fbe61bae000+17000]

I tried disabled all plugin.

Error 1.2.2 -> 1.2.8

and reinstall or disabled the ssl, this is still a problem

I check my web page that are workings.

What is the problem? What I should do it?

My system:
System: Linux fqhn 3.2.0-4-amd64 #1 SMP Debian 3.2.68-1+deb7u1 x86_64 GNU/Linux

No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 7.9 (wheezy)
Release: 7.9
Codename: wheezy

Imscp 1.2.9

Thx

Robert

BeNe · Oct 3rd 2015

Quote

fqhn kernel: [10192484.477220] php5-cgi[32096]: segfault at f ip 00007fbe61bb6ac4 sp 00007ffe125af110 error 6 in libpthread-2.13.so[7fbe61bae000+17000]

Your Server itself is ok ? This is a kernel error and is not directly in combination with i-MSCP.
Do you have enough free resources like HDD, RAM and so on ? Is it a virtuel Server or a dedicated server ?
Maybe some restrictions inside the vm ?

**kalmarr** · Oct 3rd 2015

I rebooted my system, now all web page is down......

I have a VPS.

>free
---
total used free shared buffers cached
Mem: 6131000 1515892 4615108 0 38136 672360
-/+ buffers/cache: 805396 5325604
Swap: 0 0 0
---

>df -h
Fájlrendszer Méret Fogl. Szab. Fo.% Csatol. pont
rootfs 493G 94G 374G 21% /
udev 10M 0 10M 0% /dev
tmpfs 599M 2,3M 597M 1% /run
/dev/disk/by-uuid/ee496802-7beb-42aa-a751-80ab16020540 493G 94G 374G 21% /
tmpfs 5,0M 0 5,0M 0% /run/lock
tmpfs 1,2G 0 1,2G 0% /run/shm
tmpfs 1000M 0 1000M 0% /var/tmp/apc

I see and I don't understand, what's happend the my swap file?

**kalmarr** · Oct 3rd 2015

I created new 5gb swap file, the error is same.

>free
total used free shared buffers cached
Mem: 6131000 5988888 142112 0 116412 4739244
-/+ buffers/cache: 1133232 4997768
Swap: 5119996 0 5119996

Syslog:
kernel: [ 1505.447181] php5-cgi[19010]: segfault at f ip 00007fc3a3a39ac4 sp 00007ffd44a525f0 error 6 in libpthread-2.13.so[7fc3a3a31000+17000]

**Nuxwin** · Oct 4th 2015

@kalmarr

Give us the list of all PHP module (extension) which are currently enabled on your system. Also, give us the PHP version in use and the server implementation in use.

**kalmarr** · Oct 4th 2015

I hope this is #php -m
PHP: syntax error, unexpected BOOL_TRUE in /etc/php5/cli/conf.d/20-apc.ini on line 7
PHP Warning: Module 'apc' already loaded in Unknown on line 0
[PHP Modules]
apc
apcu
bcmath
bz2
calendar
Core
ctype
curl
date
dba
dom
ereg
exif
fileinfo
filter
ftp
gd
geoip
gettext
hash
iconv
imap
intl
json
libxml
mbstring
mcrypt
memcached
mhash
mysql
mysqli
mysqlnd
openssl
pcntl
pcre
PDO
pdo_mysql
Phar
posix
Reflection
session
shmop
SimpleXML
soap
sockets
SPL
standard
sysvmsg
sysvsem
sysvshm
tokenizer
uploadprogress
wddx
xml
xmlreader
xmlwriter
zip
zlib

[Zend Modules]

# nano /etc/php5/cli/conf.d/20-apc.ini

extension=apc.so
apc.shm_segments=1
apc.shm_size=1000M
apc.ttl=86400
apc.gc_ttl=3600
apc.enable_cli=1
apc.enabled => On => On
apc.stat=1
apc.max_file_size=1M
apc.mmap_file_mask=/var/tmp/apc/apc.XXXXXX
apc.num_files_hint=15360
apc.user_entries_hint=15360
apc.user_ttl=86400
apc.optimization=0
apc.slam_defense=0
apc.localcache=1
apc.localcache.size=256
apc.lazy_functions=1
apc.lazy_classes=1

**Nuxwin** · Oct 5th 2015

First, fixt that warning and error. Once done, retry and if the problem is still here, we will look further.

**kalmarr** · Oct 5th 2015

I deleted all config content, but this error is not resolved. How can fix it?

**Nuxwin** · Oct 5th 2015

@kalmarr

By searching and thinking a bit

**kalmarr** · Oct 6th 2015

I want to solve the problem, because I will study the debugging.

https://www.google.hu/search?q=libpthread-2.13.so[7fc3a3a31000%2B17000]&ie=utf-8&oe=utf-8&gws_rd=cr&ei=J70TVpegDeSaygOUxKyQAg

#dmesg

Code

dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.68-1+deb7u4
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=ee496802-7beb-42aa-a751-80ab16020540 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000098800 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfef7000 (usable)
[ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001c0000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask FFC0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbfef7 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f0e80] f0e80
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000093000] 93000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfef7000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfef7000 page 4k
[ 0.000000] kernel direct mapping tables up to bfef7000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001c0000000
[ 0.000000] 0100000000 - 01c0000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1c0000000 @ bfef3000-bfef7000
[ 0.000000] RAMDISK: 36c66000 - 3762b000
[ 0.000000] ACPI: RSDP 00000000000f0c60 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 00000000bffe18d9 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 00000000bffe0e65 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 00000000bffe0040 00E25 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACS 00000000bffe0000 00040
[ 0.000000] ACPI: SSDT 00000000bffe0ed9 00948 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: APIC 00000000bffe1821 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 00000000bffe18a1 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001c0000000
[ 0.000000] Initmem setup node 0 0000000000000000-00000001c0000000
[ 0.000000] NODE_DATA [00000001bfffb000 - 00000001bfffffff]
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: cpu 0, msr 0:16a8741, boot clock
[ 0.000000] [ffffea0000000000-ffffea00061fffff] PMD -> [ffff8801b9600000-ffff8801be9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001c0000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000098
[ 0.000000] 0: 0x00000100 -> 0x000bfef7
[ 0.000000] 0: 0x00100000 -> 0x001c0000
[ 0.000000] On node 0 totalpages: 1572479
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3915 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767791 pages, LIFO batch:31
[ 0.000000] Normal zone: 10752 pages used for memmap
[ 0.000000] Normal zone: 775680 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfef7000 - 00000000bffe0000
[ 0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000feffc000
[ 0.000000] PM: Registered nosave memory: 00000000feffc000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 00000000fffc0000
[ 0.000000] PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3effc000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8801bfc00000 s78912 r8192 d23488 u1048576
[ 0.000000] pcpu-alloc: s78912 r8192 d23488 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] kvm-clock: cpu 0, msr 1:bfc12741, primary cpu clock
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1bfc0cfc0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1547386
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=ee496802-7beb-42aa-a751-80ab16020540 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 6119084k/7340032k available (3434k kernel code, 1050116k absent, 170832k reserved, 3305k data, 580k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Detected 3200.096 MHz processor.
[ 0.008000] Calibrating delay loop (skipped) preset value.. 6400.19 BogoMIPS (lpj=12800384)
[ 0.008000] pid_max: default: 32768 minimum: 301
[ 0.008000] Security Framework initialized
[ 0.008000] AppArmor: AppArmor disabled by boot time parameter
[ 0.008000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008911] Mount-cache hash table entries: 256
[ 0.009043] Initializing cgroup subsys cpuacct
[ 0.009047] Initializing cgroup subsys memory
[ 0.009061] Initializing cgroup subsys devices
[ 0.009065] Initializing cgroup subsys freezer
[ 0.009067] Initializing cgroup subsys net_cls
[ 0.009069] Initializing cgroup subsys blkio
[ 0.009077] Initializing cgroup subsys perf_event
[ 0.009145] CPU: Physical Processor ID: 0
[ 0.009146] CPU: Processor Core ID: 0
[ 0.009148] mce: CPU supports 10 MCE banks
[ 0.010287] ACPI: Core revision 20110623
[ 0.011449] Enabling x2apic
[ 0.011455] Enabled x2apic
[ 0.011678] Switched APIC routing to physical x2apic.
[ 0.012847] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.012849] CPU0: Intel Core i7 9xx (Nehalem Class Core i7) stepping 03
[ 0.016000] Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only.
[ 0.016000] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.016000] Booting Node 0, Processors #1 Ok.
[ 0.016000] smpboot cpu 1: start_ip = 93000
[ 0.024001] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.024001] Measured 37 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.024001] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.024033] KVM setup async PF for cpu 1
[ 0.024043] NMI watchdog disabled (cpu1): hardware events not enabled
[ 0.024033] kvm-stealtime: cpu 1, msr 1bfd0cfc0
[ 0.024033] kvm-clock: cpu 1, msr 1:bfd12741, secondary cpu clock
[ 0.024096] Brought up 2 CPUs
[ 0.024098] Total of 2 processors activated (12800.38 BogoMIPS).
[ 0.028255] devtmpfs: initialized
[ 0.030393] print_constraints: dummy:
[ 0.030393] NET: Registered protocol family 16
[ 0.030393] ACPI: bus type pci registered
[ 0.032053] PCI: Using configuration type 1 for base access
[ 0.032691] bio: create slab <bio-0> at 0
[ 0.032691] ACPI: Added _OSI(Module Device)
[ 0.032691] ACPI: Added _OSI(Processor Device)
[ 0.032691] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.032691] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.032691] ACPI: EC: Look up EC in DSDT
[ 0.033394] ACPI: Interpreter enabled
[ 0.033398] ACPI: (supports S0 S3 S4 S5)
[ 0.033413] ACPI: Using IOAPIC for interrupt routing
[ 0.037567] ACPI: No dock devices found.
[ 0.037570] HEST: Table not found.
[ 0.037573] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.037664] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.037803] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.037804] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xadff]
[ 0.037806] pci_root PNP0A03:00: host bridge window [io 0xae0f-0xaeff]
[ 0.037807] pci_root PNP0A03:00: host bridge window [io 0xaf20-0xafdf]
[ 0.037808] pci_root PNP0A03:00: host bridge window [io 0xafe4-0xffff]
[ 0.037810] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.037812] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.037866] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[ 0.038198] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[ 0.038738] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
[ 0.044018] pci 0000:00:01.1: reg 20: [io 0xc0a0-0xc0af]
[ 0.046301] pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
[ 0.051593] pci 0000:00:01.2: reg 20: [io 0xc040-0xc05f]
[ 0.053715] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
[ 0.054141] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.054152] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.054316] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
[ 0.060033] pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
[ 0.062439] pci 0000:00:02.0: reg 14: [mem 0xfebf0000-0xfebf0fff]
[ 0.073129] pci 0000:00:02.0: reg 30: [mem 0xfebd0000-0xfebdffff pref]
[ 0.073354] pci 0000:00:03.0: [1af4:1002] type 0 class 0x0000ff
[ 0.074412] pci 0000:00:03.0: reg 10: [io 0xc060-0xc07f]
[ 0.081246] pci 0000:00:0a.0: [1af4:1001] type 0 class 0x000100
[ 0.083276] pci 0000:00:0a.0: reg 10: [io 0xc000-0xc03f]
[ 0.085055] pci 0000:00:0a.0: reg 14: [mem 0xfebf1000-0xfebf1fff]
[ 0.096212] pci 0000:00:12.0: [1af4:1000] type 0 class 0x000200
[ 0.098197] pci 0000:00:12.0: reg 10: [io 0xc080-0xc09f]
[ 0.100012] pci 0000:00:12.0: reg 14: [mem 0xfebf2000-0xfebf2fff]
[ 0.109948] pci 0000:00:12.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
[ 0.110358] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.157895] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.160612] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.160701] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.160774] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.160847] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.160894] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.161142] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.161142] vgaarb: loaded
[ 0.161142] vgaarb: bridge control possible 0000:00:02.0
[ 0.161142] PCI: Using ACPI for IRQ routing
[ 0.161142] PCI: pci_cache_line_size set to 64 bytes
[ 0.161142] reserve RAM buffer: 0000000000098800 - 000000000009ffff
[ 0.161142] reserve RAM buffer: 00000000bfef7000 - 00000000bfffffff
[ 0.161142] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.161142] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.161142] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.172038] Switching to clocksource kvm-clock
[ 0.175170] pnp: PnP ACPI init
[ 0.175194] ACPI: bus type pnp registered
[ 0.175282] pnp 00:00: [bus 00-ff]
[ 0.175284] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.175286] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.175287] pnp 00:00: [io 0x0d00-0xadff window]
[ 0.175289] pnp 00:00: [io 0xae0f-0xaeff window]
[ 0.175290] pnp 00:00: [io 0xaf20-0xafdf window]
[ 0.175291] pnp 00:00: [io 0xafe4-0xffff window]
[ 0.175293] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.175294] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[ 0.175348] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.175360] pnp 00:01: [io 0x0070-0x0071]
[ 0.175412] pnp 00:01: [irq 8]
[ 0.175417] pnp 00:01: [io 0x0072-0x0077]
[ 0.175439] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.175453] pnp 00:02: [io 0x0060]
[ 0.175454] pnp 00:02: [io 0x0064]
[ 0.175471] pnp 00:02: [irq 1]
[ 0.175494] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.175521] pnp 00:03: [irq 12]
[ 0.175539] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.175563] pnp 00:04: [io 0x03f2-0x03f5]
[ 0.175564] pnp 00:04: [io 0x03f7]
[ 0.175580] pnp 00:04: [irq 6]
[ 0.175581] pnp 00:04: [dma 2]
[ 0.175604] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.175790] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.175824] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.175979] pnp 00:06: [io 0xaf00-0xaf1f]
[ 0.176021] pnp 00:06: Plug and Play ACPI device, IDs PNP0a06 (active)
[ 0.176025] pnp: PnP ACPI: found 7 devices
[ 0.176027] ACPI: ACPI bus type pnp unregistered
[ 0.186531] PCI: max bus depth: 0 pci_try_num: 1
[ 0.186539] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.186540] pci_bus 0000:00: resource 5 [io 0x0d00-0xadff]
[ 0.186542] pci_bus 0000:00: resource 6 [io 0xae0f-0xaeff]
[ 0.186543] pci_bus 0000:00: resource 7 [io 0xaf20-0xafdf]
[ 0.186544] pci_bus 0000:00: resource 8 [io 0xafe4-0xffff]
[ 0.186546] pci_bus 0000:00: resource 9 [mem 0x000a0000-0x000bffff]
[ 0.186547] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
[ 0.186727] NET: Registered protocol family 2
[ 0.188543] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.191454] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.204404] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.205594] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.205601] TCP reno registered
[ 0.205623] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.205714] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.208095] NET: Registered protocol family 1
[ 0.208120] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.208162] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.208197] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.208443] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.209311] pci 0000:00:02.0: Boot video device
[ 0.209370] PCI: CLS 0 bytes, default 64
[ 0.209476] Unpacking initramfs...
[ 0.400952] Freeing initrd memory: 10004k freed
[ 0.402238] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.402242] Placing 64MB software IO TLB between ffff8800bbef3000 - ffff8800bfef3000
[ 0.402244] software IO TLB at phys 0xbbef3000 - 0xbfef3000
[ 0.402885] audit: initializing netlink socket (disabled)
[ 0.402901] type=2000 audit(1443880440.400:1): initialized
[ 0.418356] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.420067] VFS: Disk quotas dquot_6.5.2
[ 0.420156] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.420323] msgmni has been set to 11970
[ 0.420722] alg: No test for stdrng (krng)
[ 0.420792] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.420800] io scheduler noop registered
[ 0.420801] io scheduler deadline registered
[ 0.420833] io scheduler cfq registered (default)
[ 0.420927] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.420948] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.420949] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.421025] acpiphp: Slot [3] registered
[ 0.421040] acpiphp: Slot [4] registered
[ 0.421058] acpiphp: Slot [5] registered
[ 0.421073] acpiphp: Slot [6] registered
[ 0.421087] acpiphp: Slot [7] registered
[ 0.421103] acpiphp: Slot [8] registered
[ 0.421118] acpiphp: Slot [9] registered
[ 0.421132] acpiphp: Slot [10] registered
[ 0.421149] acpiphp: Slot [11] registered
[ 0.421168] acpiphp: Slot [12] registered
[ 0.421182] acpiphp: Slot [13] registered
[ 0.421200] acpiphp: Slot [14] registered
[ 0.421214] acpiphp: Slot [15] registered
[ 0.421228] acpiphp: Slot [16] registered
[ 0.421245] acpiphp: Slot [17] registered
[ 0.421279] acpiphp: Slot [18] registered
[ 0.421295] acpiphp: Slot [19] registered
[ 0.421312] acpiphp: Slot [20] registered
[ 0.421327] acpiphp: Slot [21] registered
[ 0.421345] acpiphp: Slot [22] registered
[ 0.421362] acpiphp: Slot [23] registered
[ 0.421377] acpiphp: Slot [24] registered
[ 0.421391] acpiphp: Slot [25] registered
[ 0.421409] acpiphp: Slot [26] registered
[ 0.421424] acpiphp: Slot [27] registered
[ 0.421438] acpiphp: Slot [28] registered
[ 0.421455] acpiphp: Slot [29] registered
[ 0.421470] acpiphp: Slot [30] registered
[ 0.421483] acpiphp: Slot [31] registered
[ 0.421630] intel_idle: does not run on family 6 model 26
[ 0.421647] ERST: Table is not found!
[ 0.421649] GHES: HEST is not enabled!
[ 0.421789] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.444370] Linux agpgart interface v0.103
[ 0.444537] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.445293] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.445304] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.445539] mousedev: PS/2 mouse device common for all mice
[ 0.445809] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.446027] rtc_cmos 00:01: RTC can wake from S4
[ 0.446327] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.446662] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.446673] cpuidle: using governor ladder
[ 0.446675] cpuidle: using governor menu
[ 0.446865] TCP cubic registered
[ 0.446990] NET: Registered protocol family 10
[ 0.447437] Mobile IPv6
[ 0.447442] NET: Registered protocol family 17
[ 0.447448] Registering the dns_resolver key type
[ 0.447716] PM: Hibernation image not present or could not be loaded.
[ 0.447738] registered taskstats version 1
[ 0.448446] rtc_cmos 00:01: setting system clock to 2015-10-03 13:54:00 UTC (1443880440)
[ 0.448476] Initializing network drop monitor service
[ 0.449367] Freeing unused kernel memory: 580k freed
[ 0.449532] Write protecting the kernel read-only data: 6144k
[ 0.451183] Freeing unused kernel memory: 644k freed
[ 0.453317] Freeing unused kernel memory: 688k freed
[ 0.464739] udevd[48]: starting version 175
[ 0.479920] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.480636] virtio-pci 0000:00:03.0: setting latency timer to 64
[ 0.486650] usbcore: registered new interface driver usbfs
[ 0.486670] usbcore: registered new interface driver hub
[ 0.492987] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 0.493033] virtio-pci 0000:00:0a.0: setting latency timer to 64
[ 0.493259] virtio-pci 0000:00:12.0: setting latency timer to 64
[ 0.495663] SCSI subsystem initialized
[ 0.503025] usbcore: registered new device driver usb
[ 0.503400] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.503623] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.504455] uhci_hcd 0000:00:01.2: setting latency timer to 64
[ 0.504465] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 0.504494] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 0.504626] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040
[ 0.504722] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.504724] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.504726] usb usb1: Product: UHCI Host Controller
[ 0.504728] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 0.504729] usb usb1: SerialNumber: 0000:00:01.2
[ 0.506092] libata version 3.00 loaded.
[ 0.506820] hub 1-0:1.0: USB hub found
[ 0.507056] hub 1-0:1.0: 2 ports detected
[ 0.508204] ata_piix 0000:00:01.1: version 2.13
[ 0.509286] ata_piix 0000:00:01.1: setting latency timer to 64
[ 0.513775] scsi0 : ata_piix
[ 0.514699] scsi1 : ata_piix
[ 0.514741] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
[ 0.514743] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
[ 0.524176] virtio-pci 0000:00:0a.0: irq 40 for MSI/MSI-X
[ 0.524198] virtio-pci 0000:00:0a.0: irq 41 for MSI/MSI-X
[ 0.525825] vda: vda1
[ 0.527093] virtio-pci 0000:00:12.0: irq 42 for MSI/MSI-X
[ 0.527114] virtio-pci 0000:00:12.0: irq 43 for MSI/MSI-X
[ 0.527134] virtio-pci 0000:00:12.0: irq 44 for MSI/MSI-X
[ 0.536561] FDC 0 is a S82078B
[ 0.915740] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.211581] udevd[284]: starting version 175
[ 1.299939] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[ 1.315131] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 1.337436] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.337442] ACPI: Power Button [PWRF]
[ 1.355128] Error: Driver 'pcspkr' is already registered, aborting...
[ 1.650874] EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro
[ 1.691298] loop: module loaded
[ 1.703815] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.762082] Netfilter messages via NETLINK v0.30.
[ 1.767373] ctnetlink v0.93: registering with nfnetlink.
[ 1.986757] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 2.166452] Adding 5119996k swap on /var/swap/swap.img. Priority:-1 extents:5 across:5554172k
[ 3.873386] RPC: Registered named UNIX socket transport module.
[ 3.873389] RPC: Registered udp transport module.
[ 3.873390] RPC: Registered tcp transport module.
[ 3.873391] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.877466] FS-Cache: Loaded
[ 3.884949] FS-Cache: Netfs 'nfs' registered for caching
[ 4.435445] php5-cgi[2174]: segfault at f ip 00007ff2a2788ac4 sp 00007ffd44548600 error 6 in libpthread-2.13.so[7ff2a2780000+17000]
[ 4.573768] php5-fpm[2225]: segfault at f ip 00007fd4a4a77ac4 sp 00007ffed19c5e60 error 6 in libpthread-2.13.so[7fd4a4a6f000+17000]
[ 4.655220] php5-fpm[2351]: segfault at f ip 00007ff45532cac4 sp 00007ffcb031ee20 error 6 in libpthread-2.13.so[7ff455324000+17000]
[ 4.679628] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 190.100164] php5-cgi[21962]: segfault at f ip 00007f21cf975ac4 sp 00007ffeee9fb010 error 6 in libpthread-2.13.so[7f21cf96d000+17000]
[ 279.984908] php5-cgi[26877]: segfault at f ip 00007fa414a5fac4 sp 00007ffccba41c30 error 6 in libpthread-2.13.so[7fa414a57000+17000]
[52309.774852] php5-fpm[15472]: segfault at f ip 00007f1ff5161ac4 sp 00007ffe88d4b4b0 error 6 in libpthread-2.13.so[7f1ff5159000+17000]
[114969.618778] php5-fpm[22060]: segfault at f ip 00007fae9a4f0ac4 sp 00007ffc84cd1660 error 6 in libpthread-2.13.so[7fae9a4e8000+17000]
[114989.746483] php5-fpm[22062]: segfault at f ip 00007f853f810ac4 sp 00007ffccadf6710 error 6 in libpthread-2.13.so[7f853f808000+17000]
[115008.556169] php5-fpm[22094]: segfault at f ip 00007f72caba8ac4 sp 00007ffe5cebae80 error 6 in libpthread-2.13.so[7f72caba0000+17000]
[115074.718429] php5-fpm[22180]: segfault at f ip 00007f5d592e7ac4 sp 00007ffee2637690 error 6 in libpthread-2.13.so[7f5d592df000+17000]
[115132.326213] php5-fpm[22195]: segfault at f ip 00007f9b620b4ac4 sp 00007fffea69c990 error 6 in libpthread-2.13.so[7f9b620ac000+17000]
[115140.063732] php5-fpm[22197]: segfault at f ip 00007f124e8e3ac4 sp 00007ffc8688e5d0 error 6 in libpthread-2.13.so[7f124e8db000+17000]
[115170.139694] php5-fpm[22210]: segfault at ffffffffffffffff ip 00007f66cb2ff828 sp 00007ffc4aa7cae8 error 7 in libpthread-2.13.so[7f66cb2f5000+17000]
[115233.151007] php5-fpm[22258]: segfault at ffffffffffffffff ip 00007f366f19e828 sp 00007fff59633fa8 error 7 in libpthread-2.13.so[7f366f194000+17000]
[115302.196090] php5-fpm[22301]: segfault at f ip 00007f271d5bcac4 sp 00007ffd0f79d0e0 error 6 in libpthread-2.13.so[7f271d5b4000+17000]
[247999.312153] php5-fpm[9969]: segfault at f ip 00007f39f8e0eac4 sp 00007fff91008300 error 6 in libpthread-2.13.so[7f39f8e06000+17000]
[248011.561553] php5-fpm[10030]: segfault at f ip 00007f93aca8fac4 sp 00007fff8bd53ac0 error 6 in libpthread-2.13.so[7f93aca87000+17000]
[248051.507860] php5-fpm[10072]: segfault at ffffffffffffffff ip 00007f01ec26e828 sp 00007ffd2a52d528 error 7 in libpthread-2.13.so[7f01ec264000+17000]
[248055.605163] php5-fpm[10102]: segfault at ffffffffffffffff ip 00007fcb7ee71828 sp 00007ffdec8afb68 error 7 in libpthread-2.13.so[7fcb7ee67000+17000]
[253576.407388] php5-fpm[11826]: segfault at ffffffffffffffff ip 00007fc81762c828 sp 00007ffe6d87e088 error 7 in libpthread-2.13.so[7fc817622000+17000]
[253678.611169] php5-fpm[12022]: segfault at ffffffffffffffff ip 00007f18b27c3828 sp 00007ffc5c4af3a8 error 7 in libpthread-2.13.so[7f18b27b9000+17000]
[253698.987357] php5-fpm[12065]: segfault at ffffffffffffffff ip 00007f4484236828 sp 00007ffed3d62228 error 7 in libpthread-2.13.so[7f448422c000+17000]

Display More

I would like to ask a little help where I should seek?

Updated RoundcubePlugins 1.2.2 to RoundcubePlugins 1.2.3. -> "502 Bad Gateway - nginx"

Share

Daily visitors