Posts by Speddy

Speddy · Dec 3rd 2018

Moin Nuxwin

I have just received the following email from Yubikey

Code

Hello,
You are receiving this email because you have previously signed up for a YubiCloud client ID at https://upgrade.yubico.com/getapikey/ Starting on December 10th, 2018, support for YubiCloud v1 protocol, plain-text requests and old TLS protocols & ciphers will be deprecated.
To ensure service continuity, please read the following blog post and make sure your client configuration is up-to-date.
https://status.yubico.com/2018/11/26/deprecating-yubicloud-v1-protocol-plain-text-requests-and-old-tls-versions/ For reference, here's a list of supported client libraries:
https://github.com/Yubico/php-yubico https://github.com/Yubico/yubico-perl-client
https://github.com/Yubico/yubico-java-client https://github.com/Yubico/yubico-c-client
https://github.com/Yubico/yubico-dotnet-client
For support queries, please open a ticket at:
https://support.yubico.com/support/home Kind regards,
Yubico Team

Display More

Will the addon still go now or must it be patted?

Speddy · Nov 30th 2018

Hat sich Erledigt ich habe es selber hin bekommen nach lange suchen in weiten inet.

Speddy · Nov 30th 2018

die Platten sind laut server vorhanden und noch nicht eingehängt das ist richtig nur wenn ich sie einhängen möchte kommt ne Fehler meldung wegen denn SSH Plugin

und bevor ich da was falsch mache frage ich lieber vorher nach.

Oder denn jemanden der sich mit Proxmox aus kennt und das mit denn ip macht weil das bekomme ich nicht hin da meckert immer proxmos wenn ich ein neuen server hinzufügen möchte und die seite ist denn nach dem nicht erreichbar.

Speddy · Nov 29th 2018

Ich suche jemanden der mir bei einen OVH Server 3 Platten nachträglich hinzufügen kann und gleich in imscp CP hinzufügt.

Ich bin ein armes SChwein bitte nicht zu viel verlangen denn wie gesagt.

Mein System ist

Server Hier

I-mcsp 1.5.3

Linux 9

php 7.1

Mysql 5.7.1

Addon sind alle die mann hier Kauffen kann,sind auch Installiert und Funktionieren Tade los.

I'm looking for someone who can add to my OVH server 3 plates later and immediately in imscp CP adds.

I am a poor pig Please do not ask too much because as I said.

My system is

Server Hier

I-mcsp 1.5.3

Linux 9

php 7.1

Mysql 5.7.1

Addon are all that man here can buy, are also installed and functioning Tade going on.

Speddy · Nov 29th 2018

schaue in der Kugel und es passiert nichts.

Speddy · Nov 17th 2018

Hast du zu fällig ein woltlab oder ein xenforo mit ein Addon was cron ausführt ich zb habe für beide cms jeweils aein addon das backup für db und forum extra noch macht.

Speddy · Nov 16th 2018

added Ioncube 7.3

Shell-Script

#!/bin/bash
compDate=$(date +'%Y%m%d_%H%M%S')
echo 'Successfully set compile date to '$compDate
echo 'Starting to compile PHP modules'
perl /var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler/php_compiler.pl --auto-setup -i /opt/phpswitcher/$compDate 7.1 7.0 5.6 5.5 5.4 5.3
..#perl /var/www/imscp/gui/plugins/PhpSwitcher/PhpCompiler/php_compiler.pl --auto-setup -i /opt/phpswitcher/$compDate 7.3 7.2 7.1 7.0 5.6 5.5 5.4 5.3
echo 'Adding Extensions'
# See https://pecl.php.net/package/APCu for versions
# version 4 for pre 7.0
# version 5 for 7.0, 7.1, 7.2 7.3(not yet supported)
echo "Adding APCU"
/opt/phpswitcher/$compDate/php5.3/bin/pecl install channel://pecl.php.net/apcu-4.0.11
PHP_EXT_DIR=$(/opt/phpswitcher/$compDate/php5.3/bin/php-config --extension-dir)
echo "extension = $PHP_EXT_DIR/apcu.so" > /opt/phpswitcher/$compDate/php5.3/etc/php/conf.d/02_apcu.ini
/opt/phpswitcher/$compDate/php5.4/bin/pecl install channel://pecl.php.net/apcu-4.0.11
PHP_EXT_DIR=$(/opt/phpswitcher/$compDate/php5.4/bin/php-config --extension-dir)
echo "extension = $PHP_EXT_DIR/apcu.so" > /opt/phpswitcher/$compDate/php5.4/etc/php/conf.d/02_apcu.ini
/opt/phpswitcher/$compDate/php5.5/bin/pecl install channel://pecl.php.net/apcu-4.0.11
PHP_EXT_DIR=$(/opt/phpswitcher/$compDate/php5.5/bin/php-config --extension-dir)
echo "extension = $PHP_EXT_DIR/apcu.so" > /opt/phpswitcher/$compDate/php5.5/etc/php/conf.d/02_apcu.ini
/opt/phpswitcher/$compDate/php5.6/bin/pecl install channel://pecl.php.net/apcu-4.0.11
PHP_EXT_DIR=$(/opt/phpswitcher/$compDate/php5.6/bin/php-config --extension-dir)
echo "extension = $PHP_EXT_DIR/apcu.so" > /opt/phpswitcher/$compDate/php5.6/etc/php/conf.d/02_apcu.ini
/opt/phpswitcher/$compDate/php7.0/bin/pecl install channel://pecl.php.net/apcu-5.1.9
PHP_EXT_DIR=$(/opt/phpswitcher/$compDate/php7.0/bin/php-config --extension-dir)
echo "extension = $PHP_EXT_DIR/apcu.so" > /opt/phpswitcher/$compDate/php7.0/etc/php/conf.d/02_apcu.ini
/opt/phpswitcher/$compDate/php7.1/bin/pecl install channel://pecl.php.net/apcu-5.1.9
PHP_EXT_DIR=$(/opt/phpswitcher/$compDate/php7.1/bin/php-config --extension-dir)
echo "extension = $PHP_EXT_DIR/apcu.so" > /opt/phpswitcher/$compDate/php7.1/etc/php/conf.d/02_apcu.ini
#/opt/phpswitcher/$compDate/php7.2/bin/pecl install channel://pecl.php.net/apcu-5.1.9
#PHP_EXT_DIR=$(/opt/phpswitcher/$compDate/php7.2/bin/php-config --extension-dir)
#echo "extension = $PHP_EXT_DIR/apcu.so" > /opt/phpswitcher/$compDate/php7.2/etc/php/conf.d/02_apcu.ini
#/opt/phpswitcher/$compDate/php7.3/bin/pecl install channel://pecl.php.net/apcu-5.1.9
#PHP_EXT_DIR=$(/opt/phpswitcher/$compDate/php7.3/bin/php-config --extension-dir)
#echo "extension = $PHP_EXT_DIR/apcu.so" > /opt/phpswitcher/$compDate/php7.3/etc/php/conf.d/02_apcu.ini
echo "Adding ioncube"
cd /usr/local/src
# cleanup first (if not old version is used which is bad)
rm /usr/local/src/ioncube_loaders_lin_x86-64.tar.gz
rm -r /usr/local/src/ioncube/
# wget http://downloads3.ioncube.com/loader_downloads/ioncube_loaders_lin_x86-64.tar.gz
wget https://downloads.ioncube.com/loader_downloads/ioncube_loaders_lin_x86-64.tar.gz
tar -xzf ioncube_loaders_lin_x86-64.tar.gz
cd ioncube
PHP_EXT_DIR=$(/opt/phpswitcher/$compDate/php5.3/bin/php-config --extension-dir)
cp ioncube_loader_lin_5.3.so $PHP_EXT_DIR/ioncube.so
echo "zend_extension = $PHP_EXT_DIR/ioncube.so" > /opt/phpswitcher/$compDate/php5.3/etc/php/conf.d/01_ioncube.ini
PHP_EXT_DIR=$(/opt/phpswitcher/$compDate/php5.4/bin/php-config --extension-dir)
cp ioncube_loader_lin_5.4.so $PHP_EXT_DIR/ioncube.so
echo "zend_extension = $PHP_EXT_DIR/ioncube.so" > /opt/phpswitcher/$compDate/php5.4/etc/php/conf.d/01_ioncube.ini
PHP_EXT_DIR=$(/opt/phpswitcher/$compDate/php5.5/bin/php-config --extension-dir)
cp ioncube_loader_lin_5.5.so $PHP_EXT_DIR/ioncube.so
echo "zend_extension = $PHP_EXT_DIR/ioncube.so" > /opt/phpswitcher/$compDate/php5.5/etc/php/conf.d/01_ioncube.ini
PHP_EXT_DIR=$(/opt/phpswitcher/$compDate/php5.6/bin/php-config --extension-dir)
cp ioncube_loader_lin_5.6.so $PHP_EXT_DIR/ioncube.so
echo "zend_extension = $PHP_EXT_DIR/ioncube.so" > /opt/phpswitcher/$compDate/php5.6/etc/php/conf.d/01_ioncube.ini
PHP_EXT_DIR=$(/opt/phpswitcher/$compDate/php7.0/bin/php-config --extension-dir)
cp ioncube_loader_lin_7.0.so $PHP_EXT_DIR/ioncube.so
echo "zend_extension = $PHP_EXT_DIR/ioncube.so" > /opt/phpswitcher/$compDate/php7.0/etc/php/conf.d/01_ioncube.ini
PHP_EXT_DIR=$(/opt/phpswitcher/$compDate/php7.1/bin/php-config --extension-dir)
cp ioncube_loader_lin_7.1.so $PHP_EXT_DIR/ioncube.so
echo "zend_extension = $PHP_EXT_DIR/ioncube.so" > /opt/phpswitcher/$compDate/php7.1/etc/php/conf.d/01_ioncube.ini
#PHP_EXT_DIR=$(/opt/phpswitcher/$compDate/php7.2/bin/php-config --extension-dir)
#cp ioncube_loader_lin_7.2.so $PHP_EXT_DIR/ioncube.so
#echo "zend_extension = $PHP_EXT_DIR/ioncube.so" > /opt/phpswitcher/$compDate/php7.2/etc/php/conf.d/01_ioncube.ini
#PHP_EXT_DIR=$(/opt/phpswitcher/$compDate/php7.3/bin/php-config --extension-dir)
#cp ioncube_loader_lin_7.3.so $PHP_EXT_DIR/ioncube.so
#echo "zend_extension = $PHP_EXT_DIR/ioncube.so" > /opt/phpswitcher/$compDate/php7.3/etc/php/conf.d/01_ioncube.ini
cd
echo "Restarting services..."
service psw5.3-fpm restart
service psw5.4-fpm restart
service psw5.5-fpm restart
service psw5.6-fpm restart
service psw7.0-fpm restart
service psw7.1-fpm restart
#service psw7.2-fpm restart
#service psw7.3-fpm restart
service apache2 restart
echo "Done"

Display More

Speddy · Nov 16th 2018

Security fix: phpMyAdmin 4.8.3 is released

2018-08-22

The phpMyAdmin team is pleased to announce the release of phpMyAdmin version 4.8.2. Among other bug fixes, this contains a security fix for an issue that can be exploited when importing files.

A flaw was discovered with how warning messages are displayed while importing a file. This attack requires a specially-crafted file but can allow an attacker to trick the user in to executing a cross-site scripting (XSS) attack. We recommend updating immediately to mitigate this attack.

In addition to the security fixes, this release also includes these bug fixes and more as part of our regular release cycle:

An error where a database is named 0
Fix for NULL as default not being shown
Fix for recent tables list
Fix for slow performance with table filtering
Two-factor authentication (2FA) fails if the GD PHP library is missing
Event scheduler toggle does not work
ERR_BLOCKED_BY_XSS_AUDITOR error when exporting a table
PHP 7.3 warning: "continue" in "switch" is equal to "break"

And several more. Complete notes are in the ChangeLog file included with this release.

As always, downloads are available at https://www.phpmyadmin.net/downloads/

Speddy · Nov 16th 2018

OS/Platform	Packages		Version	Release Date
Linux (32 bits)	tar.gz	zip	10.2.7	2018-11-08 UPDATED
Linux (64 bits)	tar.gz	zip	10.2.7	2018-11-08 UPDATED

Beta Loaders for PHP 7.3

The following are beta ionCube Loaders that can be used with the release candidate (RC) versions of PHP 7.3.0 on Linux and FreeBSD 11. They can run files encoded with the version 10 PHP 7.1 and 7.2 Encoders. As with PHP 7.3.0 RC versions themselves, these loaders should not be used in a production environment.

OS/Platform Package Version Release Date

Linux (32 bits) tar.gz 10.3.0-beta 2018-11-13 UPDATED

Linux (64 bits) tar.gz 10.3.0-beta 2018-11-13 UPDATED

FreeBSD 11 (32 bits) tar.gz 10.3.0-beta 2018-11-13 UPDATED

FreeBSD 11 (64 bits) tar.gz 10.3.0-beta 2018-11-13 UPDATED

Speddy · Nov 3rd 2018

Sorry Nuxwin that I was just so funny I thought it was back to OVH I have currently only problems with the hoster.

https://youtrack.i-mscp.net/issue/IP-1805

Posts by Speddy

[2018-12-10] YubiCloud changes

OVH Server 4 mal 2 Terrabyte Nachträglich 3 Platen Hinzufügen.

OVH Server 4 mal 2 Terrabyte Nachträglich 3 Platen Hinzufügen.

OVH Server 4 mal 2 Terrabyte Nachträglich 3 Platen Hinzufügen.

Servertausch

CPU Auslastung sehr hoch

PhpSwitcher: add APCU, Imagick and IONCUBE

Security fix: phpMyAdmin 4.7.8 is released

Security fix: phpMyAdmin 4.8.3 is released

PhpSwitcher: add APCU, Imagick and IONCUBE

Französische Sprache anstat Deutsch