i-MSCP Version 1.0.3.0 (STABLE Last Update 23.03.2012] to Debian Squeeze
Configure your server:
(login in root via SSH with PUTTY)
Check your network.
[if you want to configure network:root@server1: # nano /etc/network/interfaces (ctr^X and y or n ) ]
Example:
***********************************************************
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
#allow-hotplug eth0
#iface eth0 inet dhcp
auto eth0
iface eth0 inet static
address 95.211.01.09
netmask 255.255.255.000
network 95.211.02.02
broadcast 95.211.21.001
gateway 95.211.03.03
dns-nameservers 85.17.00.01 85.17.00.02 85.17.00.03
dns-search yourserverhost.com
***********************************************************
if you modify ,then restart :
root@server1: # /etc/init.d/networking restart
Edit /etc/hosts.
root@server1: # nano /etc/hosts (ctr^X and y or n )
Make it look like this:
***********************************************************
127.0.0.1 localhost.localdomain localhost
95.211.01.09 server1.yournewhost server1
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
***********************************************************
Now run
root@server1:# echo server1.yournewhost > /etc/hostname
root@server1:# /etc/init.d/hostname.sh start
Afterwards, run
root@server1:# hostname
root@server1:# hostname -f
It is important that both show : server1.yournewhost !
Install packages:
root@server1:# apt-get update
root@server1:# apt-get upgrade --show-upgraded
root@server1:# apt-get install apache2 apache2-doc apache2-utils
root@server1:# apt-get install libapache2-mod-perl2
root@server1:# apt-get install libapache2-mod-python
root@server1:# apt-get install python-mysqldb
root@server1:# apt-get install libapache2-mod-php5 php5 php-pear php5-xcache
root@server1:# apt-get install php5-suhosin
root@server1:# apt-get install mysql-server
Set MySQL Passwords
Create MySQL root password, remove anonymous users, disallow root login remotely, remove test database (and access to it), reload privilege tables.
root@server1: # mysql_secure_installation
####################################################
NOTE: RUNNING ALL PARTS OF THIS SCRIPT IS RECOMMENDED FOR ALL MySQL
SERVERS IN PRODUCTION USE! PLEASE READ EACH STEP CAREFULLY!
In order to log into MySQL to secure it, we'll need the current
password for the root user. If you've just installed MySQL, and
you haven't set the root password yet, the password will be blank,
so you should just press enter here.
Enter current password for root (enter for none): ENTER
OK, successfully used password, moving on...
Setting the root password ensures that nobody can log into the MySQL
root user without the proper authorisation.
Set root password? [Y/n] ENTER
New password: enter your new password
Re-enter new password: enter your new password
Password updated successfully!
Reloading privilege tables..
... Success!
By default, a MySQL installation has an anonymous user, allowing anyone
to log into MySQL without having to have a user account created for
them. This is intended only for testing, and to make the installation
go a bit smoother. You should remove them before moving into a
production environment.
Remove anonymous users? [Y/n] ENTER
... Success!
Normally, root should only be allowed to connect from 'localhost'. This
ensures that someone cannot guess at the root password from the network.
Disallow root login remotely? [Y/n] ENTER
... Success!
By default, MySQL comes with a database named 'test' that anyone can
access. This is also intended only for testing, and should be removed
before moving into a production environment.
Remove test database and access to it? [Y/n] ENTER
- Dropping test database...
... Success!
- Removing privileges on test database...
... Success!
Reloading the privilege tables will ensure that all changes made so far
will take effect immediately.
Reload privilege tables now? [Y/n] ENTER
... Success!
Cleaning up...
All done! If you've completed all of the above steps, your MySQL
installation should now be secure.
Thanks for using MySQL!
####################################################
Install I-MSCP
download i-mscp-1.0.3.0.tar.bz2 and upload with your FTP client ( binnary mode) to your server in: cd /usr/local/src
root@server1:# cd /usr/local/src
root@server1:# aptitude install bzip2
root@server1:# tar xjvf i-mscp-1.0.3.0.tar.bz2
root@server1:# cd ./imscp
Install by running the imscp-autoinstall script
root@server1:# perl ./imscp-autoinstall
Then go to your panel http://95.211.01.09
Username:admin
Password:admin
for unninstall:
root@server1:# cd /usr/local/src
root@server1:# cd ./imscp
root@server1:# perl imscp-uninstall
GOOD LUCK!