Error on Update "The network interface is unknown"

    Hallo,


    ich habe eben ein Update durchgeführt auf die aktuelle Version 1.2.16 und im letzten Schritt(21) habe ich eine Fehlermeldung erhalten.



    Hat jemand eine Idee?

    Hello,


    Distro? Codename?


    Please provide us the output of these commands:


    Code
    1. # ifconfig

    and

    Code
    1. # ip -o link show

    and

    Code
    1. # ip -o addr show


    And


    SQL
    1. # mysql -u root -p<your_sql_root_password>
    2. > use imscp;
    3. > SELECT * FROM server_ips;
    4. > quit

    badge.php?id=1239063037&bid=2518&key=1747635596&format=png&z=547451206

    SSH key for online support

    hello nuxwin, I use debian 8.3 Jessy


    here the output from ifconfig:

    Code
    1. ifconfigeth0 Link encap:Ethernet HWaddr 00:16:3e:00:ca:8b inet addr:37.200.99.174 Bcast:37.200.99.255 Mask:255.255.255.0 inet6 addr: fe80::216:3eff:fe00:ca8b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:421235605 errors:0 dropped:0 overruns:0 frame:0 TX packets:868414149 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:67747318305 (63.0 GiB) TX bytes:223055898944 (207.7 GiB)lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:71019488 errors:0 dropped:0 overruns:0 frame:0 TX packets:71019488 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:26927905511 (25.0 GiB) TX bytes:26927905511 (25.0 GiB)


    ip -o link show:

    Code
    1. 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default \ link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:002: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default \ link/ether ee:c4:b4:bc:c5:09 brd ff:ff:ff:ff:ff:ff3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000\ link/ether 00:16:3e:00:ca:8b brd ff:ff:ff:ff:ff:ff4: teql0: <NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 100\ link/void5: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default \ link/ipip 0.0.0.0 brd 0.0.0.06: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default \ link/sit 0.0.0.0 brd 0.0.0.07: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default \ link/tunnel6 :: brd ::

    sql-DB (the name is ispcp)

    Code
    1. mysql> SELECT * FROM server_ips;+-------+---------------+---------+-----------+| ip_id | ip_number | ip_card | ip_status |+-------+---------------+---------+-----------+| 1 | 37.200.99.174 | | ok |+-------+---------------+---------+-----------+1 row in set (0.00 sec)


    ip -o addr show:


    Code
    1. 1: lo inet 127.0.0.1/8 scope host lo\ valid_lft forever preferred_lft forever
    2. 1: lo inet6 ::1/128 scope host \ valid_lft forever preferred_lft forever
    3. 3: eth0 inet 37.200.99.174/24 brd 37.200.99.255 scope global eth0\ valid_lft forever preferred_lft forever
    4. 3: eth0 inet6 fe80::216:3eff:fe00:ca8b/64 scope link \ valid_lft forever preferred_lft forever

    @ctm5000


    Please run:


    SQL
    1. # mysql -u root -p<your_sql_root_password>
    2. > use ispcp;
    3. > UPDATE server_ips SET ip_card = 'eth0';
    4. > quit


    Once done, rerun the i-MSCP installer.

    badge.php?id=1239063037&bid=2518&key=1747635596&format=png&z=547451206

    SSH key for online support