Logdatei Proftp

Hat jemand eine Ahnung wohin Proftpd seine Failed Logs schreibt??

Benutzt fail2ban, aber in die proftpd.log loggt er nicht, hab keine Ahnung wo sonst hin????

Durch fail2ban werden IP- Adressen gesperrt die x Mal versuchen auf einen bestimmten Dienst zuzugreifen, in dem Fall auf den proftpd Dienst.
Hab es mit der auth.log versucht, ging aber nicht da jede Aktion am Ftp- Client einem Eintrag verursacht und dadurch die IP- Adresse gesperrt wird.

Sprich ich will nur das falsche Anmeldungen in der Datei gespeichert werden.

Danke für die Hilfe

Welche Conf benötigst du??

Hier oder privat??

Hier die jail.conf

# Fail2Ban configuration file.
#
# This file was composed for Debian systems from the original one
# provided now under /usr/share/doc/fail2ban/examples/jail.conf
# for additional examples.
#
# To avoid merges during upgrades DO NOT MODIFY THIS FILE
# and rather provide your changes in /etc/fail2ban/jail.local
#
# Author: Yaroslav O. Halchenko <[email protected]>
#
# $Revision: 281 $
#

# The DEFAULT allows a global definition of the options. They can be override
# in each jail afterwards.

[DEFAULT]

# "ignoreip" can be an IP address, a CIDR mask or a DNS host
ignoreip = 127.0.0.1
findtime = 86400
bantime = 1800
maxretry = 3

# "backend" specifies the backend used to get files modification. Available
# options are "gamin", "polling" and "auto".
# yoh: For some reason Debian shipped python-gamin didn't work as expected
# This issue left ToDo, so polling is default backend for now
backend = polling

#
# Destination email address used solely for the interpolations in
# jail.{conf,local} configuration files.
destemail = [email protected]

#
# ACTIONS
#

# Default banning action (e.g. iptables, iptables-new,
# iptables-multiport, shorewall, etc) It is used to define
# action_* variables. Can be overriden globally or per
# section within jail.local file
banaction = iptables-multiport

# email action. Since 0.8.1 upstream fail2ban uses sendmail
# MTA for the mailing. Change mta configuration parameter to mail
# if you want to revert to conventional 'mail'.
mta = sendmail

# Default protocol
protocol = tcp

#
# Action shortcuts. To be used to define action parameter

# The simplest action to take: ban only
action_ = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s]

# ban & send an e-mail with whois report to the destemail.
action_mw = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s]
%(mta)s-whois[name=%(__name__)s, dest="%(destemail)s", protocol="%(protocol)s]

# ban & send an e-mail with whois report and relevant log lines
# to the destemail.
action_mwl = %(banaction)s[name=%(__name__)s, port="%(port)s", protocol="%(protocol)s]
%(mta)s-whois-lines[name=%(__name__)s, dest="%(destemail)s", logpath=%(logpath)s]

# Choose default action. To change, just override value of 'action' with the
# interpolation to the chosen action shortcut (e.g. action_mw, action_mwl, etc) in jail.local
# globally (section [DEFAULT]) or per specific section
action = %(action_)s

#
# JAILS
#

# Next jails corresponds to the standard configuration in Fail2ban 0.6 which
# was shipped in Debian. Enable any defined here jail by including
#
# [SECTION_NAME]
# enabled = true

#
# in /etc/fail2ban/jail.local.
#
# Optionally you may override any other parameter (e.g. banaction,
# action, port, logpath, etc) in that section within jail.local

[ssh]

enabled = true
port = ssh
filter = sshd
logpath = /var/log/auth.log
maxretry = 4

# Generic filter for pam. Has to be used with action which bans all ports
# such as iptables-allports, shorewall
[pam-generic]

enabled = false
# pam-generic filter can be customized to monitor specific subset of 'tty's
filter = pam-generic
# port actually must be irrelevant but lets leave it all for some possible uses
port = all
banaction = iptables-allports
port = anyport
logpath = /var/log/auth.log
maxretry = 6

[xinetd-fail]

enabled = false
filter = xinetd-fail
port = all
banaction = iptables-multiport-log
logpath = /var/log/daemon.log
maxretry = 2

[ssh-ddos]

enabled = true
port = ssh
filter = sshd-ddos
logpath = /var/log/auth.log
maxretry = 6

#
# HTTP servers
#

[apache]

enabled = false
port = http,https
filter = apache-auth
logpath = /var/log/apache*/*error.log
maxretry = 6

# default action is now multiport, so apache-multiport jail was left
# for compatibility with previous (<0.7.6-2) releases
[apache-multiport]

enabled = true
port = http,https
filter = apache-auth
logpath = /var/log/apache*/*error.log
maxretry = 6

[apache-noscript]

enabled = false
port = http,https
filter = apache-noscript
logpath = /var/log/apache*/*error.log
maxretry = 6

[apache-overflows]

enabled = false
port = http,https
filter = apache-overflows
logpath = /var/log/apache*/*error.log
maxretry = 2

#
# FTP servers
#

[vsftpd]

enabled = false
port = ftp,ftp-data,ftps,ftps-data
filter = vsftpd
logpath = /var/log/vsftpd.log
# or overwrite it in jails.local to be
# logpath = /var/log/auth.log
# if you want to rely on PAM failed login attempts
# vsftpd's failregex should match both of those formats
maxretry = 6

[proftpd]

enabled = true
port = ftp,ftp-data,ftps,ftps-data
filter = proftpd
logpath = /var/log/auth.log
maxretry = 6

[wuftpd]

enabled = false
port = ftp,ftp-data,ftps,ftps-data
filter = wuftpd
logpath = /var/log/auth.log
maxretry = 6

#
# Mail servers
#

[postfix]

enabled = true
port = smtp,ssmtp
filter = postfix
logpath = /var/log/mail.log

[couriersmtp]

enabled = false
port = smtp,ssmtp
filter = couriersmtp
logpath = /var/log/mail.log

#
# Mail servers authenticators: might be used for smtp,ftp,imap servers, so
# all relevant ports get banned
#

[courierauth]

enabled = false
port = smtp,ssmtp,imap2,imap3,imaps,pop3,pop3s
filter = courierlogin
[5~logpath = /var/log/mail.log

[sasl]

enabled = true
port = smtp,ssmtp,imap2,imap3,imaps,pop3,pop3s
filter = sasl
# You might consider monitoring /var/log/warn.log instead
# if you are running postfix. See http://bugs.debian.org/507990
logpath = /var/log/mail.log

# DNS Servers

# These jails block attacks against named (bind9). By default, logging is off
# with bind9 installation. You will need something like this:
#
# logging {
# channel security_file {
# file "/var/log/named/security.log" versions 3 size 30m;
# severity dynamic;
# print-time yes;
# };
# category security {
# security_file;
# };
# };
#
# in your named.conf to provide proper logging

# !!! WARNING !!!
# Since UDP is connectionless protocol, spoofing of IP and immitation
# of illegal actions is way too simple. Thus enabling of this filter
# might provide an easy way for implementing a DoS against a chosen
# victim. See
# http://nion.modprobe.de/blog/a…-fail2ban-+-dns-fail.html
# Please DO NOT USE this jail unless you know what you are doing.
#[named-refused-udp]
#
#enabled = false
#port = domain,953
#protocol = udp
#filter = named-refused
#logpath = /var/log/named/security.log

[named-refused-tcp]

enabled = false
port = domain,953
protocol = tcp
filter = named-refused
logpath = /var/log/named/security.log

Hier die proftpd.conf aus der filters.de

# Fail2Ban configuration file
#
# Author: Yaroslav Halchenko
#
# $Revision$
#

[Definition]

# Option: failregex
# Notes.: regex to match the password failures messages in the logfile. The
# host must be matched by a group named "host". The tag "<HOST>" can
# be used for standard IP/hostname matching and is only an alias for
# (?:::f{4,6}:)?(?P<host>[\w\-.^_]+)
# Values: TEXT
#
failregex = \(\S+\[<HOST>\]\)[: -]+ USER \S+: no such user found from \S+ \[\S+\] to \S+:\S+ *$
\(\S+\[<HOST>\]\)[: -]+ USER \S+ \(Login failed\): .*$
\(\S+\[<HOST>\]\)[: -]+ SECURITY VIOLATION: \S+ login attempted\. *$
\(\S+\[<HOST>\]\)[: -]+ Maximum login attempts \(\d+\) exceeded *$

# Option: ignoreregex
# Notes.: regex to ignore. If this regex matches, the line is ignored.
# Values: TEXT
#
ignoreregex =